Cordless Power Tools - Save on Cordless Tools, Power Tools

###############################################################################################################################################################################################################################################################

Milwaukee 12V Li ion power in a small package. 1/4 Inch quick change chuck with one handed bit change feature. Built in fuel gauge. Overmold on the side to prevent scratching finish work surfaces. LED light for illuminating dark work spots. Includes 2 Batteries Charger and Case.

Includes 18V Cordless LXT 3/8" Angle Drill Kit - BDA350Z, Tool Only - Battery (BL1830) & Charger (DC18RA) Sold Separately, Operating Manual

SPECIFICATIONS Milwaukee 3107-8 1/2 Inch Right Angle Drill; Voltage -- 120 AC; Chuck Size -- 1/2 inch; Amps -- 7.0; RPM w/RAD -- 0-350/0-750 RPM; No Load Speed -- 0-500 RPM; Chuck Type - Keyed; Gear Train - Quadruple; Cord Type -- 8 ft. Quick-Lok; Construction type - Grounded; Spindle Lock - No; Length -- 16-3/4 inches; Tool Weight -- 10.3 lbs.; Shipping Weight 16.5 lbs; The Milwaukee 3107-8 Includes: Carrying Case, RAD Assemble, Side Handle, 9/16 inch Open End Wrench, 3/16 inch Socket Wrench, Chuck Remover Bar

Light up your drilling surface with high-output LED power! Powerful 4 Amp angle drill boasts a very compact design (10 5/8in. long). Its equipped with a speed-limiting dial to prevent over tightening of fasteners and a paddle switch for easy one-handed operation. Amps: 4, Chuck Size (in.): 3/8, Speed (RPM): 2,400, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No

A unique tool that makes it easy to work in tight, awkward spaces without sacrificing power, the DW960K-2 Right Angle Drill is a member of DeWalt's 18-volt power tool system. Featuring two distinct modes for project-specific performance, a low mode that delivers 0 to 500 RPM for 310 in./lbs. of torque and a high mode that delivers 0 to 1,500 RPM for 80 in./lbs. of torque, this heavy duty tool performs well in a wide range of applications. Also offering a 3/8-inch chuck that is compatible with a large compliment of drill bits and a multi-grip design that forefronts a three-position rubber paddle switch for maximum versatility and close quarters, this drill driver comes with a one-hour charger, two 18-volt batteries, a screwdriver bit, and a heavy-duty kit box for easy transport and storage. It is backed by a 3-year limited warranty.

Brand new Milwaukee M12 Cordless 3/8\" Right Angle Drill Driver - The Milwaukee 2415-20 includes: Milwaukee Cordless 3/8\" Right Angle Drill Driver (Bare Tool), Batteries and Charger Sold Separately

This Milwaukee 28V cordless right angle drill is designed for boring large holes between studs or joists or in tight areas. V28 lithium-ion battery technology delivers up to twice the run time of Ni-Cd tools. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists or boring holes in floors for plumbing venting. Rugged motor and geartrain are durable enough to handle the toughest jobs. Max. Torque (in.-lbs.): 1,081, Volts: 28, Speed - No Load (RPM): 0 - 400/0 - 1,000, Chuck Size (in.): 1/2, Reversible: Yes, Side Handle: Included, Battery Included: Yes, Charger Included: Yes, Case Included: Yes

As everyone knows, both plumbing and electrical work require drilling in tight spots. While the Milwaukee Hole Hawg may be the choice for most professional plumbers and electricians, this less-expensive right-angle drill is a solid option to consider for the same applications. Featuring a slim, lightweight design and great versatility, Milwaukee's right-angle drill has a 1/2-inch chuck and three speed ranges and is fully adjustable. The head and handle swivel 360 degrees and can be locked tight in any position, allowing you to fit this drill anywhere this drill could possibly fit. HVAC contractors can use this drill with bits to 4-5/8 inches without a problem. And, if necessary, the right-angle mechanism can be removed and the drill converted to straight D-handle use. If you have major remodel or construction plans, this is a smart drill to consider. --Tim Block

Smaller grip and low head in 83mm for quarter work. Faster drilling speed, slide switch, reversing switch and variable speed dial on rear end. STANDARD EQUIPMENT: 1 chuck wrench, 1 side handle. SPECIFICATIONS: 500W, 500-2,300/min. no-load speed. Drilling capacity: 3/8" in steel, 7/8" in wood. 11-7/16" overall length. 3.3 lbs. tool weight.